LME:
2.698,07 €
-0,48 %
-13,1100 €
HUF/EUR:
363,72
-0,14 %
-0,5000 Ft
HUENDEROHRSK
Log in |
ACH
LME: 2.698,07 € ↘︎ -0,48 % -13,1100 €
HUF/EUR: 363,72 ↘︎ -0,14 %
Log in
HUENDEROHRSK
EN AW-5083 (AlMg4,5Mn0,7) aluminium round bar
Aluminium round bars

EN AW-5083 (AlMg4,5Mn0,7) aluminium round bar

Magnesium-manganese alloy (AlMg4,5Mn0,7) offering excellent corrosion resistance and very good weldability. Non-heat-treatable, with medium strength and good cold formability — first choice for marine and chemical-resistant structures.

  • Excellent corrosion resistance – optimised for saline/outdoor environments.
  • Very good weldability – low cracking tendency, stable weld quality.
  • Medium strength
  • Technical anodising is possible; in decorative anodising the appearance may be limited.
Field of use
  • Food industry
  • Worktops and table tops
  • Machine and component manufacturing
  • Shipbuilding
Alloy grade
EN AW-5083 (AlMg4,5Mn0,7)
Tempers
H112 (O/H111 rarely)
Formats
Bar stock – extruded

EN AW-5083 – chemical composition1

(EN 573-3)

Specifications (%)

Remainder: Aluminium

 Others
Si Fe Cu Mn Mg Cr Ni Zn Ti Ga V Notes Each Total2
0,40 0,40 0,10 0,40 - 1,00 4,00 - 4,90 0,05 - 0,25 - 0,25 0,15 - - - 0,05 0,15
1 Chemical specifications are in mass %. Where no range is given, the alloying content is the maximum value.
2 Includes all elements for which no separate limit is specified.

EN 755-2 – Mechanical properties: extruded aluminium round bars

The values below are indicative and show typical mechanical properties according to the standard.

Delivery temper Diameter
(mm)		 Tensile strength Rm
(MPa) 		Proof strength Rp0,2
(MPa) 		Elongation (% min.) Hardness
HBW
min. max. min. max. A50 mm A
O / H111 ≤ 200 270 – 110 – 10 12 70
H112 ≤ 200 270 – 125 – 10 12 70

EN AW-5083 – Al Mg4,5 Mn0,7 – general alloy grade information

The values and data below are indicative – they help to give a general picture of the material.

Alloy designations

EN AWAl Mg4,5 Mn0,7
Old designationAl Mg4,5 Mn
Material number (DIN)3.3547
United Kingdom (BS)N8
Italy (UNI)9005/5
SpainL-3321
Sweden144140
Norway17215
France (AFNOR)A-G4,5MC
Colour code RAL 8002   Signal Brown

Typical physical properties

Density [g/cm3]2,66
Modulus of elasticity [GPa]71
Thermal conductivity [W/m*K]110 – 140
Thermal expansion coefficient [K-1*10-6] -50°C – 20°C   |   22,3
20°C – 100°C   |   24,2
20°C – 200°C   |   25,0
20°C – 300°C   |   26,0
Specific heat [J/(kg*K)]900
Electrical conductivity [m/Ω*mm2]16 – 19
Shear modulus [GPa]26,8
Machinability
Annealed3
Work-hardened2
Heat-treated-
Dimensional stability2
EDM1
Surface treatment
Anodising – protective2
Special anodising quality (EQ)-
Anodising – decorative4
Painting / coating4
Polishing2
Weldability
Process Value Filler metal
Gas3 – 4SG-Al 5183
TIG2SG-Al 5356
MIG2SG-Al 5087
Resistance welding2-
Solderability
Brazing with flux4 – 5
Brazing without flux4 – 5
Abrasion soldering3
Soft soldering with flux4 – 5
Corrosion resistance
Normal atmosphere1
Marine environment1
Formability
Cold forming Value Delivery temper
Bending2
Compression forming4
Deep drawing2O
Upsetting2 – 3O
Impact extrusion4
Hot forming
Closed-die forging4 – 5
Extrusion4
Hammer forging4
Food-contact use (DIN EN 602) yes

Legend

1very good
2good
3medium
4poor
5not suitable
EQ Anodising quality must be ordered separately and confirmed in writing

Dimensional tolerances of extruded round bars

DIN EN 755-4 : 2008

Alloy groups

Group I EN AW-1050A, EN AW-1070A, EN AW-1200, EN AW-1350
EN AW-3102, EN AW-3003, EN AW-3103
EN AW-5005, EN AW-5005A, EN AW-5051A, EN AW-5251
EN AW-6101A, EN AW-6101B, EN AW-6005, EN AW-6005A, EN AW-6106, EN AW-6008, EN AW-6010A, EN AW-6012, EN AW-6014, EN AW-6018, EN AW-6023, EN AW-6351, EN AW-6060, EN AW-6360, EN AW-6061, EN AW-6261, EN AW-6262, EN AW-6262A, EN AW-6063, EN AW-6063A, EN AW-6463, EN AW-6065, EN AW-6081, EN AW-6082, EN AW-6182
Group II EN AW-2007, EN AW-2011, EN AW-2011A, EN AW-2014, EN AW-2014A
EN AW-2017A, EN AW-2024, EN AW-2030
EN AW-5019, EN AW-5049, EN AW-5052, EN AW-5154A, EN AW-5454, EN AW-5754, EN AW-5083, EN AW-5086
EN AW-7003, EN AW-7005, EN AW-7108, EN AW-7108A, EN AW-7020, EN AW-7021, EN AW-7022, EN AW-7049A, EN AW-7075

Diameter tolerances (extruded – EN 755)

Dimensions in millimetres (mm)
Ø mm Tolerances
from to Alloy group I Alloy group II
≥ 1018± 0,22± 0,30
1825± 0,25± 0,35
2540± 0,30± 0,40
4050± 0,35± 0,45
5065± 0,40± 0,50
6580± 0,45± 0,70
80100± 0,55± 0,90
100120± 0,65± 1,0
120150± 0,80± 1,2
150180± 1,0± 1,4
180220± 1,15± 1,7
Note: For tolerances outside the sizes above, please ask our sales team.

Dimensional tolerances of extruded round bars

DIN EN 755-4 : 2008

Alloy groups

Group I EN AW-1050A, EN AW-1070A, EN AW-1200, EN AW-1350
EN AW-3102, EN AW-3003, EN AW-3103
EN AW-5005, EN AW-5005A, EN AW-5051A, EN AW-5251
EN AW-6101A, EN AW-6101B, EN AW-6005, EN AW-6005A, EN AW-6106, EN AW-6008, EN AW-6010A, EN AW-6012, EN AW-6014, EN AW-6018, EN AW-6023, EN AW-6351, EN AW-6060, EN AW-6360, EN AW-6061, EN AW-6261, EN AW-6262, EN AW-6262A, EN AW-6063, EN AW-6063A, EN AW-6463, EN AW-6065, EN AW-6081, EN AW-6082, EN AW-6182
Group II EN AW-2007, EN AW-2011, EN AW-2011A, EN AW-2014, EN AW-2014A
EN AW-2017A, EN AW-2024, EN AW-2030
EN AW-5019, EN AW-5049, EN AW-5052, EN AW-5154A, EN AW-5454, EN AW-5754, EN AW-5083, EN AW-5086
EN AW-7003, EN AW-7005, EN AW-7108, EN AW-7108A, EN AW-7020, EN AW-7021, EN AW-7022, EN AW-7049A, EN AW-7075

Diameter tolerances (extruded – EN 755)

Dimensions in millimetres (mm)
Ø mm Tolerances
from to Alloy group I Alloy group II
≥ 1018± 0,22± 0,30
1825± 0,25± 0,35
2540± 0,30± 0,40
4050± 0,35± 0,45
5065± 0,40± 0,50
6580± 0,45± 0,70
80100± 0,55± 0,90
100120± 0,65± 1,0
120150± 0,80± 1,2
150180± 1,0± 1,4
180220± 1,15± 1,7
Note: For tolerances outside the sizes above, please ask our sales team.
EN AW-5083 (AlMg4,5Mn0,7) aluminium round bar
EN AW-5083 (AlMg4,5Mn0,7) aluminium round bar
EN AW-5083 (AlMg4,5Mn0,7) aluminium round bar
Back to the previous page
Note: We accept no liability or warranty for the correctness, accuracy or completeness of the information and data stated above. Standards and indicative values may change. Agreements are valid as set out in the quotation / order confirmation. We also draw attention to the fact that we accept no liability for colour shades arising during decorative anodising, or for corrosion-resistance results and how they develop. Individual terms may be agreed on a case-by-case basis and must be recorded in writing.