LME:
2.698,07 €
-0,48 %
-13,1100 €
HUF/EUR:
363,72
-0,14 %
-0,5000 Ft
HUENDEROHRSK
Log in |
ACH
LME: 2.698,07 € ↘︎ -0,48 % -13,1100 €
HUF/EUR: 363,72 ↘︎ -0,14 %
Log in
HUENDEROHRSK
EN AW-5754 (AlMg3) – cast, milled aluminium plate
Cast and milled aluminium plates

EN AW-5754 (AlMg3) – cast, milled aluminium plate

Cast and both-sides milled, stress-relieved EN AW-5754 (AlMg3) precision plate offering excellent corrosion resistance and weldability at moderate strength. The stable, homogeneous structure and precision milling also provide good flatness and dimensional retention after machining.

  • Corrosion-resistant – it also withstands outdoor, humid, mildly aggressive media.
  • Milled on both sides, with protective film – precision surface, excellent flatness.
  • Excellent anodisability – also recommended specifically for decorative purposes.
Alloy grade
EN AW-5754 (AlMg3) – cast, milled
Product form
Precision cast plate, milled on both sides, with protective film
Thicknesses
Thickness tolerance: +/-0.1 mm
Formats
Plate form, surface milled on both sides

EN AW-5754 – chemical composition1

(EN 573-3)

Specifications (%)

Remainder: Aluminium

 Others
Si Fe Cu Mn Mg Cr Ni Zn Ti Ga V Notes Each Total2
0,40 0,40 0,10 0,50 2,60 - 3,60 0,30 - 0,20 0,15 - - 0,10 - 0,60 Mn+Cr 0,05 0,15
1 Chemical specifications are in mass %. Where no range is given, the alloying content is the maximum value.
2 Includes all elements for which no separate limit is specified.
Öntött, síkba mart alumínium lemez 5754
Öntött, síkba mart alumínium lemez 5754
Öntött, síkba mart alumínium lemez 5754
Back to the previous page
Note: We accept no liability or warranty for the correctness, accuracy or completeness of the information and data stated above. Standards and indicative values may change. Agreements are valid as set out in the quotation / order confirmation. We also draw attention to the fact that we accept no liability for colour shades arising during decorative anodising, or for corrosion-resistance results and how they develop. Individual terms may be agreed on a case-by-case basis and must be recorded in writing.